Tile Saws - selecting the Right Saw For Your Cutting Job

Tile saws are used to cut flooring materials including ceramic tile, porcelain, marble, granite and slate. Tile saws come in any distinct types, however, they all share some basic similarities. All tile saws cut by abrading or scraping the surface of the material at high speed. This is regularly done with a diamond blade. diamond blades, as their name implies, have many tiny man made commercial quality diamond suspended in a hardened metal powder. As the blade spins against the tile, the diamonds scrape away the material in a thin level line, eventually cutting the tile in two. The blade builds up heat as it cuts. To keep the heat generated by the blade from over-heating the motor, the tile saw uses water to cool the blade as it cuts. diamond blades can be substituted as they wear out. Blades can also be changed on the saw allowing the saw user to hire distinct blade types for cutting distinct materials.

Bench Type Tile Saws

Saw Bench

These saws are small, light and portable. They feature a blade that protrudes up straight through a slot in the cutting surface. Blade sizes on these saws vary from 4 to 7 inches in diameter. Since these saws regularly do not have a table rail, there is no physical limit to the size of tile they can cut. As a practical matter, cutting a tile that is larger than the size of the table is difficult. Directly below the blade is a water pan. As the blade spins, it travels straight through the water to cool. The cutting depth of the blade is regularly adjustable. Some saws also allow the angle of the blade to be adjusted for miter cuts. Because the blade turns directly on the motor shaft, these saws regularly have only one speed. Due to their size and straightforward design, these saws are relatively inexpensive, easy to use and a good option for homeowners.

7 inch Tile Saws with Stand

These saws are larger and heavier than bench top units and often come with a stand. The 7 inch diameter blade is mounted above the cutting table which slides on rollers or bearings. The tile remains stationary on the table as it is pushed into the blade. These saws use a pump law to cool the blade as opposed straightforward water immersion. They use a direct drive motor and often have accessories like laser cutting guides not found on smaller saws. These saws regularly can not deal with tiles larger than 13" square. This type of saw is accepted for experienced homeowners or contractors looking for a cost efficient saw that can be surely moved. Expect to pay 0 to 0 for a saw like this.

10 inch Tile Saws with Stand

These saws are large and heavy. They can weight 150 pounds or more and feature a belt driven motor. Many of these saws have many cutting speeds that make them more flexible for cutting a wide collection of material. These saws use a 10 inch diameter blade though some saws can use larger blades. Their bigger frame and cutting table means they can deal with large format tiles. Some saws in this kind can cut tiles up to 30 inches square. These saws use a water pump to cool the blade and feature many accessories for cutting angles and miters. This type of saw is the option for contractors and other heavy users. Prices range from 0 to any thousand dollars for this type of saw.

When selecting a tile saw, users should keep in mind what kind of carrying out they are going to need. By matching the size of their job, the size and type of material that needs to be cut and the funds available, the user will be sure to buy a tile saw that is just right for the job at hand.

Tile Saws - selecting the Right Saw For Your Cutting Job