grinder Cutoff Saw - Throw Your Hacksaw Away!

Abrasive Saw

What is it?

Saw Bench

Abrasive saws are commonly called a cutoff saw or metal chop saw. It is approximately all the time electrically powered and is used to cut steel and stainless steel. A thin polisher disc spins at a high speed and the grist performance of the spinning wheel cuts the metal. Today's bench top polisher saws have a built-in vise to clamp the metal your are cutting. They commonly can be used on the ground but I suggest bolting them to a workbench to make it easy to use.

The composite disk blade uses friction to abrasively cut through the steel. The disks are consumable items and they wear and have to be replaced regularly. The polisher disks commonly are 14 inch diameter and 7/64 inch thick. There are market versions that use a 16 inch diameter blade. Disks are available for mild steel and stainless.

These transported metal cutoff saws have made many jobs easier. polisher saws are much more inexpensive, transported and lightweight than power band saws. polisher saws have all but replaced acetylene torches in many building applications, like cutting rebar.

Do you need and polisher saw?

If you only cut a few metal objects every year a hacksaw works well, but if you have a lot of metal to cut it is all the time a good choice to rent or buy this saw.

If I had a welder and wanted to build a trailer, race car, or a buildings out of metal tube this is the best tool to cut the metal to length. You can make 90 degree and angle cuts easily.

It also works well for cutting metal studs.

If you are pouring a slab for a shed or garage this saw will make short work of cutting the rebar that you put into the cement.

Using One

If you have used a miter saw to cut wood you can unquestionably learn to use this saw to cut metal. If you are using this saw for the first time it will be very noisy and scary because it cuts by grist the metal and throws sparks all over the place. Make sure the item you are cutting is clamped in tight and cut gently and you will do fine. all the time effect the protection instructions in the hand-operated that comes with the saw. Because the saw throws and lot of sparks when cutting I highly suggest protection glasses, long sleeves and long pants. Make sure there are no combustible items in the path of the sparks. all the time clamp the work into the saw. If you are doing a lot of cutting, wear hearing protection.

grinder Cutoff Saw - Throw Your Hacksaw Away!