Tips For Using a Handsaw

Many population think that using a handsaw is hard work but it needn't be. A handsaw, used correctly, can furnish good results with minimal effort.  Here are some points to remember when using a handsaw.

Buying a handsaw. There are good quality disposable handsaws on the market. These have hardened teeth that do not need sharpening. When selecting a saw do not be tempted to buy the cheapest one as these are often of poor quality. A good disposable handsaw will last a long time before it becomes dull. When the saw does become dull a new one will have to be bought. A dull saws should be disposed of responsibly so that it can be recycled.

Saw Bench

Holding the handsaw. The correct way to hold a handsaw is to grip the cope with your thumb, second, third and forth fingers. Your first (index) finger should be in a pointing position along the side of the handle, in the direction of the length of the handsaw. Having your index finger in this position gives greater control over the handsaw. Marking out you cut. Using a square or straightedge, draw a fine line with a pencil  where you want the cut to be. Take your time with this as mistakes are positively made. There is an old saying "Measure twice, cut once" Supporting the work piece. You will need something to sustain the piece of wood that you are cutting. A saw horse or bench is good for this but make sure it is sitting solidly without any rocking. Keep things in line. When using a handsaw, the saw blade, your forearm and shoulder should be in line with each other. They should also be in line with the line that you have drawn on the work piece. Make sure you are standing comfortably. Making the cut. The private of using a handsaw is to let the saw do the work. Allowing the handsaw to do the work will wish the least exertion and furnish the best result. Hold the handsaw at  about a 45 degree angle. There are reasons to hold the saw at a different angle but I won't go into these here. Retention the handsaw at 45 degrees will furnish optimum results. When you are sawing use an even, to and fro action. Apply a small amount of pressure on the down stroke and issue the pressure on the upstroke. Use your index finger to steady the saw. You should not cut down the middle of the line but, instead cut tightly along the waste side of the line. Remember, when cutting, to keep all things in line as mentioned above.

If you have never used a handsaw before practice on some scrap bits of wood to get used to the technique. Sawing a straight line can be very satisfying.

Tips For Using a Handsaw

Recommend : milwaukee 2490 24 12-volt compact drill